Programing Craftsman garage doorbell remotes have two different types. They will both work on the garage door. It says models 139.30498 and 139.30499, but uh it will work on other models if you just program it the right way. The first one there’s a little button on the back use a little pen or a screw or something to just tap that button in. Go up to your garage door opener there’s a learn button right there. Hit that button like that and you go back to your remote and you press it three times. Then you exit the programming by hitting any button other than when you hit. Then you go back up press the learn button again. Then you click on and the light’s going to flash on and off once. When you hit that button again and it exits the program mode and now it should be ready to work.
Step two after you hit the button on the back of the remote, depending on what color your learn mode is. Hit the learn button three times and then hit the button on the remote three times after hitting the learn button. if your learn button color is yellow you’re gonna hit it once, if your learn button is purple gonna hit the button twice. If it’s orange hit it three times and if it’s green you’re gonna hit the button the remote four times to get it into program mode. As far as the program settings go, the first thing you do is find your learn button on the garage door opener. Hold it press the button that you want to program on until the lights flicker. Press the orange button again to exit program mode.
Garage Ideas :How to program craftsman in Garage. arbor covered walkway Craftsman.